Single-Stage Activated-Carbon Adsorber - Stainless Steel

The SUS304/SUS316L single-stage activated-carbon adsorber is designed for industrial VOC and gaseous-pollutant treatment. Its stainless-steel structure provides high mechanical strength and is suitable for large-airflow applications.

Working Principle

Exhaust gas enters through the inlet and passes through activated-carbon beds, where pollutants are adsorbed. The treated gas then exits through the outlet.

Models and Technical Parameters

↔ Swipe horizontally to view all specifications.

Model	Length L (mm)	Width W (mm)	Height H (mm)	Inlet/Outlet W (mm)	Inlet/Outlet H (mm)	Centerline Height Above Floor (mm)	Airflow at 0.6 m/s (m³/h)	Airflow at 1.2 m/s (m³/h)
WH3-5K-1A	1180	850	1000	700	750	575	2,765	5,530
WH3-10K-1A	1180	1050	1350	900	1100	750	5,184	10,368
WH3-15K-1A	1730	1050	1450	900	1200	800	7,776	15,552
WH3-15K-1B	1380	1250	1500	1100	1250	825	7,776	15,552
WH3-20K-1A	2130	1050	1650	900	1400	900	10,368	20,736
WH3-20K-1B	1730	1350	1200	1200	1200	800	10,109	20,218
WH3-20K-1C	1380	1250	1650	1100	1700	1050	10,368	20,736
WH3-25K-1A	2330	1150	1800	1000	1550	975	12,830	25,661
WH3-25K-1B	1930	1450	1500	1300	1350	875	12,701	25,402
WH3-25K-1C	1730	1350	1850	1200	1600	1000	13,478	26,957
WH3-30K-1A	2330	1150	1800	1000	1550	975	15,163	30,326
WH3-30K-1B	2130	1550	1900	1400	1400	900	20,736	41,472
WH3-35K-1A	2780	1350	1800	1200	1550	975	17,690	35,381
WH3-35K-1B	2330	1550	1800	1400	1550	975	17,496	34,992
WH3-40K-1A	2780	1550	2000	1400	1600	1000	20,412	40,824
WH3-40K-1B	2530	1650	1850	1500	1550	1000	20,736	41,472
WH3-50K-1A	3380	1550	2100	1400	1850	1125	26,244	52,488
WH3-50K-1B	3080	1750	2000	1600	1750	1075	26,438	52,877
WH3-60K-1A	3680	1650	2250	1500	2000	1200	31,104	62,208
WH3-60K-1B	3380	1850	2100	1700	1850	1125	31,493	62,986

Technical Requirements

↔ Swipe horizontally to view all specifications.

Inspection Item	Unit	Requirement	Result
Pressure Drop	kPa	≤ 2.5	Pass
Airtightness	—	Welds and pipe connections of the adsorption unit must be airtight, with no gas leakage.	Pass
Operating Noise	dB(A)	≤ 85	Pass
Benzene — Emission Concentration	mg/m³	≤ 12	Pass
Benzene — Removal Efficiency	%	≥ 90	Pass
Toluene — Emission Concentration	mg/m³	≤ 40	Pass
Toluene — Removal Efficiency	%	≥ 90	Pass
Xylene — Emission Concentration	mg/m³	≤ 70	Pass
Xylene — Removal Efficiency	%	≥ 90	Pass

Material Selection Guide

↔ Swipe horizontally to view all specifications.

Comparison	PP	Stainless Steel
Suitable Environment	Exhaust gas containing halogens or strong acids	Environments requiring explosion-proof certification
Airflow Suitability	Small- and medium-scale exhaust-gas treatment	Large-scale exhaust-gas treatment
Maintenance and Structural Characteristics	Short maintenance window	No deformation risk